anyone can help or give us advice ??

Hello,

we are considering changing from Enroute 3d which we recently purchased and are having difficulties with the software, including:
1. file formats between Rhino and Enroute - parts go missing, and
2. Our biggest issue is processing times - a typical relativly simple job measuring 1000 x 500mm takes about 2 hours and 30 mins to toolpath, and then about 30 mins to write the nc code. - The pc we are running the software on is a dual xeon 3.4 ghz - so there is plenty of power in the machine.

If anyone can help or give us advice it would be appreciated.

Please help.

I didn't find the right solution from the internet.

References:
https://mecsoft.com/phpbb/viewtopic.php?f=6&t=274
Animated Demonstration Video

Thank you.

▶ Reply to This

Replies to This Discussion

Permalink Reply by Brian James on August 6, 2018 at 6:46am

Hi,

I'm not familiar with Enroute but if you are considering RhinoCam as a replacement, I've heard it's a good one. I'd suggest asking the MecSoft crew directly about any questions or post to the Rhino forum here https://discourse.mcneel.com/ . This is a a rendering forum for the Brazil plugin for Rhino and you may not find CAM folks here to help.